top of page

Explore New Heights. Give your third-generation Ford Super Duty superior lift height with Rough Country's 6-inch Coilover Suspension Lift Kit! This all-inclusive kit comes with everything you need to transform your truck. Run up to 37in tires while preserving the smooth, factory ride quality with this impressive upgrade.

Durable Components. When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 6-inch Suspension Lift features a set of ultra-durable radius arm drop brackets, precision fit to bolt right into the factory mounts for an easier installation, and a more factory-like angle. Utilizing this conversion kit you're removing the factory-independent coil shock and coil set-up and replacing it with a massive 2.5in piston, nitrogen-charged, 8-stage adjustable Vertex Coilover. Rough Country’s Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. When it comes to investing in a high-end kit, you’ll be pleased to find that Rough Country’s 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock. Each kit is paired with a monotube shock that provides optimal damping control.

Installation. Requiring cutting and drilling to install, an estimated timeframe of 6-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly!

Limited Lifetime Replacement Warranty. Rough Country's 6-inch Coilover Suspension Lift Kit is backed with a limited lifetime replacement warranty for manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!

 

FEATURES

  • Easy bolt-on installation
  • Increased ground clearance
  • Levels the front with the rear of the vehicle
  • Radius arm drop brackets allow for a properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
  • Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problems.

 

NOTES - IMPORTANT

  • Does NOT F-350 models.
  • Does NOT fit dually models.
  • Must know if rear leaf springs are equipped with a factory contact overload spring.
  • Gas models may require exhaust modification to clear the front drive shaft.

 

Est. Install Time6-10 hours

 

FRONT

  • Vertex Coilovers
  • Radius Arm Drop Brackets
  • Sway-Bar Drop Brackets
  • Track Bar Drop Bracket
  • Stabilizer Relocation Brackets
  • Pitman Arm
  • Brake Line Brackets
  • Bumpstop Spacers
  • Hardware

REAR

  • Fabricated Anti-Wrap Lift Blocks
  • Carrier Bearing Drop Bracket
  • Brake Line Brackets
  • U-Bolts
  • Hardware

SHOCKS

  • (2) Rear V2 Monotube Shocks

 

YEARSDRIVEMAKEMODEL
2011-20144WDFordF-250 Super Duty

ALWAYS read all product page details for more important fitment information.

 

TIREWHEELBOLT PATTERNOFFSETNOTE
37x12.50R1717x98x170-12-
37x12.50R1717x98x170+0-
37x12.50R1717x98x170+1-
37x12.50R1818x98x170-12-
37x12.50R1818x98x170+0-
37x12.50R1818x98x170+1-
37x12.50R2020x98x170-12-
37x12.50R2020x98x170+0-
37x12.50R2020x98x170+1-
37x12.50R2020x108x170-25-
37x12.50R2020x108x170-24-
37x12.50R2020x108x170-19-
37x12.50R2020x108x170-18-
35x12.50R2020x128x170-44Minor Trimming
37x12.50R2222x108x170-25-
37x12.50R2222x108x170-24-
37x12.50R2222x108x170-19-
37x12.50R2222x108x170-18-
35x12.50R2222x128x170-44Minor Trimming

 Due to differences in manufacturing, dimension, and inflated measurements, tire and wheel combinations should be test fit before installation.

(2011-2014) FORD SUPER DUTY 4WD 6 INCH LIFT COILOVER CONVERSION KIT

SKU: 53358
$2,849.95Price
    bottom of page