Give your Dodge an aggressive look from front to rear with Rough Country’s 5" Dodge Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and a more aggressive appearance.
This kit features a set of front, durable coil springs allowing you to gain additional ride height without sacrificing ride quality or performance. A set of track bar drop brackets and control arms are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts.
A set of Rough Country's premium N3 shocks are also included in this kit. These fine-tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.
Get the wheels you want! Rough Country's 5" Dodge Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing.
Best of all, Rough Country's 5" Dodge Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Includes application-valved N3 series shock absorbers that offer the best-balanced performance for on and off-road use.
NOTES - IMPORTANT
- Does NOT fit models with the "Off-Road" package.
|Est. Install Time||4 - 6 hours|
|Recommended Tire Size||35x12.50|
- Lifted coil springs
- Upper fixed control arms
- Lower fixed control arms
- Pitman arm
- Track bar drop bracket
- Sway-bar drop brackets
- 4" fabricated lift blocks
- (4) Premium N3 series
ALWAYS read all product page details for more important fitment information.
Due to differences in manufacturing, dimension, and inflated measurements, tire and wheel combinations should be test fit before installation