Give your 78-79 Ford Bronco an aggressive look from front to rear with Rough Country’s 2.5" Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and a more aggressive appearance.
This kit features a set of front, durable coil springs allowing you to gain additional ride height without sacrificing ride quality or performance. A set of 4-degree c-bushings and track bar drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts.
A set of Rough Country's premium N3 shocks are also included in this kit. These fine-tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.
Get the wheels you want! Rough Country's 2.5" Ford Suspension Lift Kit comes with everything you need to fit up to a 33" tire with proper wheel backspacing.
Best of all, Rough Country's 2.5" Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.
FEATURES
- Increased ground clearance
- Levels the front with the rear of the vehicle
NOTES - IMPORTANT
- Vehicles with factory quad shocks (2 front shocks per side) will simply use a single aftermarket shock
| Est. Install Time | 4-6 hours |
|---|---|
| Recommended Tire Size | 33x12.50 |
| Recommended Wheel Backspacing | Factory |
FRONT
- Lifted coil springs
- Track bar drop bracket
- 4-degree C-bushings
- Hardware
REAR
- 2in lift blocks
- U-bolts
- Hardware
SHOCKS
- (4) N3 Series
| YEARS | DRIVE | MAKE | MODEL |
|---|---|---|---|
| 1978-1979 | 4WD | Ford | Bronco |
ALWAYS read all product page details for more important fitment information.
| TIRE | WHEEL | BOLT PATTERN | OFFSET | NOTE |
|---|---|---|---|---|
| 33x12.50R15 | Factory 15 | 5x5.5 | - | - |
Due to differences in manufacturing, dimension, and inflated measurements, tire and wheel combinations should be test fit before installation.